[MOQ: 10KG] Steelfill, 1,75 mm / 750 g - 图片 2

[MOQ: 10KG] Steelfill, 1,75 mm / 750 g - 图片 3

[MOQ: 10KG] Steelfill, 1,75 mm / 750 g - 图片 4

[MOQ: 10KG] Steelfill, 1,75 mm / 750 g - 图片 5

[MOQ: 10KG] Steelfill, 1,75 mm / 750 g - 图片 6

[MOQ: 10KG] Steelfill, 1,75 mm / 750 g - 图片 7

[MOQ: 10KG] Steelfill, 1,75 mm / 750 g - 图片 8

[MOQ: 10KG] Steelfill, 1,75 mm / 750 g - 图片 9

库存件

In stock

colorFabb

[MOQ: 10KG] Steelfill, 1,75 mm / 750 g

Steel filament for special applications

$4.99

⚡Free shipping on orders over $70.⚡

More information regarding shipping & delivery

Features & Advantages

Perfect finish
Unique feel of the surface
Heavier than normal PLA
Fine metal powder contained in the filament
For advanced users

Item no. CF-8719033555655

Categories: 3D printer filament, PLA filament for all FDM 3D printers

Product information & technical details

Item no.: CF-8719033555655
Manufacturer No.: 8719033555655
Manufacturer: colorFabb
Diameter: 1,75 mm
Product type: Metal Filaments
Color: Grey / silver
System: Spool
Recommended processing temperature: 190 - 210 °C
Recommended heating temperature: 50 - 60°C
Diameter related tolerance : ¡À 0,05 mm

Description

Steel die

The high steel content of Steelfill material causes a very abrasive effect on the normal brass nozzles. It is not as extreme as the XT-CF20, but it can affect the print quality after printing with this material. After about 1.5 kg, the impact of the material on the print quality can be seen.

Therefore we recommend using a hardened nozzle.

Heated building board

Steelfill can be easily printed on a cool platform with BlueTape or a building board spray. If your 3D printer has a heated board, we recommend that you heat it to about 50°C.

Layer height

For the first test prints, we recommend using a layer height between 0.2-0.27 mm when printing with 0.4 mm nozzles. In general, this will give you a good amount of flow with the default settings to prevent clogging of the hot-end.

If you use lower layer heights, reduce either the printing speed or the temperature. Furthermore, the flow has to be adjusted.

Printing temperature

Steelfill is quite similar in performance to Bronzefill. For most devices, the standard PLA temperature is a good starting point.

Cooling

Steelfill is very effective at cooling during printing. Only use the cooling if you really need it on the model. (Many details, sharp corners, etc.) Less cooling means a better layer adhesion. Ideally, start with 50% cooling capacity.

Retraction

Before you set the values for the retract, make sure the temperature and speed are already optimal. PLA retract values are a good starting point for most machines. However, one can expect slightly higher values for the best results.

Downloads