dichtol AM Spray, 500 ml

Dichtol AM Spray is a ready-to-use product with a special polymer formulation that impregnates leaking components and seals small pores of 0 to 0.1 mm. It exhibits high pressure resistance and provides temporary protection from corrosion or during transport.

Suitable for:

• capillary-active deep impregnation of micropores, hairline cracks and porosities,
• targeted serial impregnation,
• single-point impregnation of large components,

Preparation and application:

Before application, the pores to be sealed must be thoroughly cleaned of dirt residues and other undesirable substances.

Apply the dichtol AM Spray four times at 1-minute intervals and keep moist for at least 5 minutes to allow the product to penetrate the pores deeply. Note that the temperature of the object to be impregnated should not exceed 40¡ãC. The penetration of the polymer cannot be guaranteed at higher temperatures.

The impregnating product dries out completely after a short time.

Storage: Store the unopened bottle in a cool and dry place (+5¡ãC to 30¡ãC).

Shelf life: 5 years.