dichtol AM Makro Spray, 500 ml

The dichtol AM Makro Spray is a ready-to-use product with a special polymer formulation that reliably impregnates leaking components and seals large pores of size 0.1 to 0.5 mm. It exhibits high pressure resistance and provides temporary protection from corrosion or during transport.

Suitable for:

• capillary-active deep impregnation of micropores, hairline cracks and porosities,
• targeted serial impregnation,
• single-point impregnation of large components,

Preparation and application:

Before application, the pores to be sealed must be thoroughly cleaned of dirt residues and other undesirable substances.

Apply the dichtol AM Macro Spray four times at 1-minute intervals and keep it moist for at least 5 minutes to allow the product to penetrate the pores deeply. Note that the temperature of the object to be impregnated should not exceed 40¡ãC. The penetration of the polymer cannot be guaranteed at higher temperatures.

The impregnating agent dries completely in a few hours, thus the treated components can be used after a short period of time.

Storage: Store the unopened product in a cool and dry place (+5¡ãC to +20¡ãC).

Shelf life: 5 years.