TR300 Ultra-High-Temp Resin in Grey, 1.000 g

Thermally resistant resin for high temperature applications

$53.90

⚡Free shipping on orders over $70.⚡

More information regarding shipping & delivery

Features & Advantages

Extremely high thermal resistance
High mechanical strength
Cures quickly
Temperature resistant up to 220°C

Item no. PHR-64010502714074

Categories: 3D Printer Resin, Standard resin for 3D printers

Product information & technical details

Item no.: PHR-64010502714074
Manufacturer No.: 64010502714074
Manufacturer: Phrozen
Shore Hardness : D80
Product type: Resin
Light source: LCD
Color: Grey / silver

Description

Phrozen's TR300 resin has extremely high heat resistance, high mechanical strength and toughness, making it ideal for high-temperature applications such as dental thermoforming and industrial mock-ups.

It was specially developed for 405nm LCD 3D printers and takes only 1.3 seconds to cure when printed with a 3D printer from the Phrozen Sonic series.

Properties

Viscosity: 160 cps at 250°C
Density: 1.1 g / cm3
Tg (glass transition temperature): 220°C
Tensile elongation at break: 2%
Tear strength: 32 MPa
Tensile modulus: 1850 MPa
Surface hardness: Shore 80D
Pencile hardness: 5H (at 500g load)
IZOD notched impact strength: 8 KJ / m2

Instructions for use

Clean the model with alcohol spray, do not immerse in alcohol for long periods of time.
Store resins at room temperature and in dark, ventilated areas.
Shake resin well before use.
Used resins should be stored in a closed, opaque bottle after printing. Mixing used and a new resin should be avoided.
Resins should always be kept away from children and direct sunlight.
It is important to wear gloves and a mask when using it. In the event of direct skin or eye contact, wash off immediately with water.
Resin cannot simply be disposed of. It should be hardened and then disposed of as general plastic waste.